manualshive.com logo in svg

Hy-Security HTG 320-2, Installation And Maintenance Manual, Page: 30 / 65

Share
Download
Hy-Security HTG 320-2 Installation And Maintenance Manual Download Page 30

Installation and Maintenance Manual

 

24 

 

Description of Functions Available in the Installer  Menu 

 

Installer 1

    [uC  0]

  

Set UL Usage Class:

 This menu item is used to set the UL usage class, which 

must be set by the installer before the operator will function.  See page 17, step 2. 
 

Installer 2

    [Fd  0]    

Load Factory Defaults:

 This menu item is used to globally restore all menu 

settings back to new machine status.  To activate, change the setting 0 to 1 and push the Menu button. 
The UL usage class and the hand configuration will need to be set again. 
 

Installer 3

    [dg  0]    

Set Solo, Master or Slave type:

  This menu item is used to configure an operator 

as a Master or a Slave operator in Master/Slave paired gate installations. 
 

Installer 4

    [Ch  0]

   

Set AC Charger or Solar:

 This menu item only appears on 24 VDC battery 

machines only and is set to solar only when there is no AC battery charger. 
 

Installer 5

    [Fo  0]    

Enable Fire Dept. Open:

  This menu item is used to enable the Fire Dept. Open 

input.  When set to [Fo_1] this input will override vehicle detectors, photo eyes and gate edges to open a 
gate.  A reset input is required before the gate can be closed. 
 

Installer 6

    [oC  0]   

Enable Emergency Close:  

This menu item is used to enable the Emergency 

Close input.  When set to [oC_1] this input will, with a constant hold input, override vehicle detectors, 
photo eyes and gate edges to close a gate.  A reset input is required before the gate can be opened. 
 

Installer 7

    [SE  6]   

Inherent Sensor sensitivity:

. This menu item is to adjust the sensitivity of the 

internal inherent sensor.  Available settings are 1-9, with 9 being the least sensitive. 
 

Installer 8

    [SS  0]

  

Inherent Sensor function:  

This menu item is only available in UL class 4 

operators and allows an option whereby the inherent sensor will only stop the gate.

 

 

 

Installer 9

  [LC  0]

  

Leaf delay Close:

  This menu item only appears if the operator is set up as a Master 

or a Slave.  Available settings are 1-7.  Each increment adds ½ second, to a maximum of 3 ½ seconds 
time delay, before the operator activates when commanded to close. 

 

Installer 10

  [Lo  0]

  

Leaf delay Open:  

This menu item only appears if the operator is set up as a 

Master or a Slave.  Available settings are 1-7.  Each increment adds ½ second, to a maximum of 3 ½ 
seconds time delay, before the operator activates when commanded to open. 

 

 

Installer 11

  [rt   0]   

Maximum run timer:  

The maximum run timer has a default setting of 60 seconds. 

This menu item allows an optional setting of 300 seconds, if changed to [rt_1]. 

 

 

Installer 12

  [EC  0]  

PEC (photo eye close) reverse to open:

  The default for this menu item is for 

non-reversal if the close photo eye is triggered.  The optional setting of [EC_1] will cause the gate to 
reverse to open for two seconds if triggered while closing.

 

 

Installer 13

  [PC 0]  

Set PEC – NO/NC:  

The default for this menu item is for photo eyes with Normally 

Open outputs.  The optional setting of [PC_1] will require a Normally Closed output.  If set for N.C. the 
connection is also supervised and any open or short circuit fault will generate a FAL2 alert, which 
requires a Stop button reset to re-enable any function if triggered. 
 

Installer 14

  [gC  0]  

Set Edge input – NO/NC:  

The default for this menu item is for edge sensor with 

Normally Open outputs.  The optional setting of [gC_1] will require a N.C. output. 

Summary of Contents for HTG 320-2


































































Reviews:

No comments