NOTE: For rotators mounted above the
rotator `mounting plate, follow these
instructions and refer to Figure 18.
1. Insert the rotator mounting plate in the
tower so it rests on the mounting plate
stops.
2.
Install the rotator on the mounting
plate. Use the mounting bolts supplied
with the rotator.
3. Loosen the mast clamp so the mast can
be inserted in the clamp.
4. Tighten the mast clamp around the
5. Mount your antenna on the top of -the
mast. If you are using coax anus, tie
your rotator coax to the coax arms.
6. Connect your coax to the radio equip-
ment
7. Reconnect the removable brace to its
original position on the tower section.
Tighten the # 10 hardware securely.
Tighten the #10 x 3/4" bolts and secure
with the #10 hex locknuts.
Figure 17 Typical Installation of
Rotator mounted Below Plate
Figure 18 Typical Installation of
Rotator Mounted Above Plate
4
Summary of Contents for HG-52SS
Page 2: ......
Page 22: ...Figure 19 Tower Nvi th Call Outs of All Parts 4 ...
