Hy-Gain HG-52SS, Manual

Page: 18 / 22

If cable becomes slack again, raise toe tower
to tighten the cable and repeat the procedure.
Another procedure to free binding sections is
to rotate the antenna to a different heading one
or more times. Doing so can help solve the
binding caused by steps 3 and 4 of this
section.
Winch Winch Winch Winch
Routine inspection of the winch and
performing preventive maintenance will insure
maximum
performance and unnecessary
Check the-winch annually. In wet or dirty en-
vironments check more frequently.
If foreign objects must be removed to free the
tower, DO NOT CLIMB THE TOWER! Be
sure all cables are tight before doing so. If
none of the previous methods work to free the
tower, seek professional help. A snorkel or
boom truck can be utilized to inspect, and
correct the cause of the binding. Never leave
the cable slack hoping the tower will free
itself. If it does come free it could collapse
completely, damaging both the tower and the
antenna. All Hy-Gain towers are factory tested
(fully extended and retracted) and inspected
before being shipped, to insure proper
condition.
To increase the life of the winch and for con-
tinued smooth performance, grease the gears,
reel shaft and handle threads (Item N, BB,
and F). Also place a drop of oil on the drive
shaft bearings (Items B and L). Refer to the
Winch Manual.
CAUTION: DO NOT OIL OR GREASE
THE BRAKE MECHANISM (PRESSURE
PLATE).
,
Protecting the finish of the winch will
provide longer service. Wash the winch with
water, dry thoroughly, then wipe with light
oil or wax.