Figure 15 Attaching Boom-to-
Mast Bracket
Other Types of Towers
When installing the Discoverer 7-3 on a
guyed tower, you may wish to use a different
guide system. If you have insulators on your
guy wires, you will need to keep the antenna
away from the guy wires as well as the tower.
You may wish to use two ropes attached
together at the top of the tower and attached to
the ground about 15 feet apart.
These two ropes can then be used to slide the
antenna on as if is also being lifted. The two
ropes will need to be far enough from the
tower base to allow some sag and still support
the antenna away from the guy wires.
WARNING
Installation of this product near power lines
is dangerous. For your safety follow the
instructions.
Summary of Contents for DIR-73
