ZERO-TURN SERIES
ZT-1230
•
ZT-1630
10
11
MAINTENANCE & TROUBLESHOOTING MANUAL
ZT5.0-M REV A
SECTION 2
MAINTENANCE
2.3 | LUBRICATION
Item
Specification
Frequency of Lubrication
Wheels
Teflon Spray
Quarterly
2.4 | COMPONENTS REQUIRING ADJUSTMENT
Under normal use, no components should require adjustment. Contact the manufacturer if adjustments are
required.
2.5 | EXAMINATION, REPAIR, REPLACEMENT OF LIMITED LIFE COMPONENTS
With proper use, regular battery charging, and regular inspection, there are no limited life components that
require routine replacement.
2.6 | SAFETY DEVICES AND SYSTEMS REQUIRING CHECKS
Check safety functions as part of daily inspection. Check that the brakes are holding.
2.7 | STORAGE
After periods of storage, exposure to extremes of ambient conditions-heat, cold, moisture, dust etc. inspect
the machine. Batteries will need to be charged. Refer to the Pre-Delivery/Frequent Inspection Checklist in the
Maintenance Manual.
2.8 | MAJOR ALTERATIONS OR REPAIRS
Any alterations must be approved by the manufacturer. Major repairs, which affect the stability, strength, or
performance of the machine must also be approved by the manufacturer, recorded, and include machine
inspection and testing. Never attach pipe racks, material lifting devices, or make any other alteration that is not
part of the intended design of the machine.
THIS PAGE WAS INTENTIONALLY LEFT BLANK
