Hy-Brid Lifts
3
Maintenance & Troubleshooting Manual
HB-P827 / HB-P1027
Part No. SUPO 670
Rev. C
FOREWORD
The purpose of this Operations and Safety manual is to provide users with the instructions and
operating procedures essential to properly and safely operate the Custom Equipment Hy-Brid Lift
for its intended purpose, and to position personnel and their necessary tools and materials.
WARNING
DANGER
THE OPERATION AND SAFETY MANUAL MUST BE READ AND UNDERSTOOD PRIOR TO OPER-
ATING THE MACHINE.
• The user/operator should not accept operating responsibility until the manual has been read
and understood as well as having operated the lift under supervision of an experienced and
qualified operator.
• Because the manufacturer has no direct control over machine application and operation,
proper safety practices are the responsibility of the user and all operating personnel.
ANY MODIFICATION ON THIS MACHINE WITHOUT THE EXPRESS WRITTEN CONSENT OF THE
MANUFACTURER IS PROHIBITED.
Fall protection notice:
The guardrail system around the perimeter of the platform is
the fall
protection system
for push-around elevating work platforms per the ANSI/SIA A92.3 Standard. It
is
prohibited
to use an Aerial Work Platform manufactured by Custom Equipment, Inc. With any
portion—or all—of the guardrails removed. Lanyard anchorage points on this type of equipment
are not required to conform to the applicable standard. However, if anchorage points for lan-
yard attachments are required by site authorities or other regulations, the anchorage points on
all equipment manufactured by Custom Equipment, Inc. Are recommended to be used for
work
positioning restraints
of personnel only. Lanyard lengths are to be determined by operator/own-
er to restrict the operator to the confines within the guardrail system.
USE OF FALL ARREST SYSTEMS ATTACHED TO ANCHORAGE POINTS ON EQUIPMENT MAY
CAUSE MACHINE TO TIP, RESULTING IN SERIOUS INJURY OR DEATH.
WARNING
Lanyard
Attachment
