Hy-Brid Lifts
Maintenance & Troubleshooting Manual
HB-P827 / HB-P1027
Part No. SUPO 670
Rev. C
12
SECTION 2 | SAFETY
2.6
| Safety Guidelines
• Only qualified operators may operate this unit.
• All operators must read and understand the Operation and Safety Manual. They must understand all
decals and warning labels on unit.
• Do not work on platform if your physical condition is such that you feel dizzy or unsteady in any way.
• Do not neglect/misuse machine. Report any misuse of equipment to proper personnel.
• Prevent unauthorized use; when unit is not in use, remove key.
• It is recommended all personnel on unit wear approved personal protective equipment (PPE), i.e. head
gear.
• Use machine only for purposes for which it was intended.
• Lift should never be used as a crane.
• Do not exceed the load capabilities of the platform.
• Distribute load evenly over platform floor area.
• Never use unit as electrical grounds for arc welding.
• Do not override any hydraulic, mechanical, or electrical safety devices.
• Check job site for unsafe working conditions.
• Watch out for others. Keep others clear of operating platform. Never allow others to pass under a raised
platform or position the platform over someone.
• Avoid contact with fixed (buildings, etc.) or moving (vehicles, cranes, etc.) objects. Check work area for
overhead obstructions or possible hazards.
• Follow any applicable national traffic regulations.
• Use indoors only. Lift is not designed for windy conditions or electrical storms.
• Unit must be on hard level surface before elevating. Do not operate on incline or uneven surface.
• You must maintain a clearance between any part of the machine, or its load, and any electrical line or
apparatus. Follow local power line clearance regulations.
• You must maintain a clearance between any part of the machine, or its load, and any electrical line or
apparatus. Follow local power line clearance regulations.
• Do not operate machine near power lines. The platform and enclosures are not insulated.
Equipment is only as safe as the operator.
• Do not use ladders or scaffolding on the platform to obtain greater height.
• Do not enter or exit platform while machine is in motion.
• Never mount or dismount a raised platform.
• Make sure entry gate is secured before operating machine from the platform.
• Never belt or tie off to an adjacent structure.
• Secure tools and materials.
• Personnel must maintain a firm footing on the platform floor and work only within the platform area.
• Before operation, ensure that the machine is properly serviced.
• Do not use machine if it is not working properly.
• Make sure platform rails and pins are secured.
• Operator shall use the maintenance lock when performing all types of maintenance procedures.
• Do not smoke while charging the battery.
DANGER
