TOM1
ADV
Headroom 87
TOM1
ADV
SenseTime 50
TOM1 ADV
Trigger Linear
ADVANCED SETTINGS
Includes all the physical settings for pads/triggers.
- Sensitivity:
The higher the value is, the easier it will be to
trigger. But if this value is too high, will cause some crosstalk
problems.
- Headroom:
Set the velocity dynamic range. This value is
the velocity needed to get max volume, so the lower the
value is, the easier to get louder sounds.
- SenseTime:
Sets the interval between two triggering. In-
crease this value by certain amount may avoid being trig-
gered multiple times by vibration in very short time.
- Trigger:
Sets the velocity curve for pads, including Linear,
EXP1&2, LOG1&2 and Spline.
Refer to the following
diagram,
on horizontal is the velocity you strike, and on ver-
tical is the volume after processed by the trigger curve.
- Xtalk:
Sets the crosstalk for pads. Use max power to strike
a pad repeatedly until the screen shows OK, and then
TOM1 ADV
Sensitivity 77
SETUP
ADVANCE [ENTER]
V
o
l-
ume
V
o
l-
ume
V
o
l-
ume
V
o
l-
ume
Linear
Exp
Log
Spline
Strength
Strength
Strength
Strength
Diagram of 4 types of the velocity curve
SETUP
TOM1
ADV
Note Send 48
change to another pad and repeat the procedure. Velocity
data on other pads will be loaded automatically for reference
in order to avoid crosstalk.
- Note Send:
Set the MIDI note for each trigger. When the
midi note is different between this module and other sound
sources, by adjusting this value they can be easily matched.
TOM1
ADV
Xtalk
Auto
13
