23. TRIGGER INPUTS: Trigger inputs socket is located at the rear side of sound module. Connect
the multi-trigger connector (AKA 25pin connector) to this socket and lock it.
24. LINE OUT: Stereo main output. Connect this output to any amplifier using 1/4
”
TRS cable.
25. LINE IN: Analog input socket of the sound module, 1/4
”
TRS.
Tip
：
An extra 1/4
”
male to male cable will be needed if you want connect your sound module
to any sound source such as iPod, iPad,CD player, mobile phone or computer. Play and practice with
your favorite music.
26. VOLUME: Adjust the output level of the module. Rotate it clockwise to increase volume.
27. PHONE: Connect your headphone here. 1/4
”
TRS output. An extra 1/8
”
female to 1/4" male
adaptor might be needed if your headphone is using 1/8" input.
28. USB: Connect standard B type USB cable to this socket for updating firmware, gaming, recording
midi and using plug-ins for more sound on computer.
Tip
：
Connect USB2.0 A male to B male cable to this socket, such cable is very common in
home printers.
29. ON/OFF: Turns the module on and off. The module will be automatically shut down if there is no
operation or triggering in about 30 minutes to save energy.
30. POWER: Connect the attached DC 12V power adapter to this socket.
Connectors
SOUND MODULE
23
24
25
26
27
28
29
30
7
