TO SELECT A KIT
- Stay at the KIT mode and use the scroll wheel to select a
kit, you will see KIT at top-left corner on screen. If you are
not at this mode, press EXIT button several times to go back
to this mode.
Tip
：
While adjusting parameters, you can change
its value by rotating the scroll wheel.
Press the wheel to proceed to submenu or to confirm op-
eration when needed.
TO EDIT A KIT
- Press EDIT to enter EDIT MODE, where you can assign
different voices and adjust other parameters to make your
own kit. Strike on different part on each pad to select among
triggers, or use DRUM button to switch between drum
instruments.
- Use PAGE / button to enter VOICE TYPE menu and
use scroll wheel to choose a voice category. Choose
“
---
”
for a blank voice.
- Use PAGE / button to enter VOICE menu and use
scroll wheel to choose a voice within the selected category
referring to Voice List in <APPENDIX> .
Tip
：
The meaning of shortened voice names: R
stands for Rim shot, X for Cross stick, E for Edge, B for
Bell, C for Close, O for Open, Half for Half Open, P for Pedal
Chick, Sp for Pedal Foot Splash.
- Use PAGE / button to enter VOLUME menu to adjust
the volume level for a single trigger.
- Press EXIT to quit the current menu and select a place to
save it using scroll wheel. You can either save it to a preset
kit or a user kit if you don
’
t want to overwrite the preset kit.
Press ENTER again to confirm or press EXIT to cancel.
SNARE-Rim
VOLUME
80
Voice name
Select or Change
BASIC OPERATION
KIT
120 4/4
Rock
1
Kit No.
Kit name
Time signature
Tempo
SNARE-Rim
VOICE TYPESNARE
Voice category
Part to edit
SNARE-Rim
VOICE Rock R
Save Kits to
Rock
----Save OK ----
--------------------
10
