CONTROL IDENTIFICATION
MP34.3370
16MAR10
JACK RETRACTION
UNDERSTAND OPERATOR’S MANUAL BEFORE USING. BLOCK FRAME AND TIRES
SECURELY BEFORE REMOVING TIRES OR CRAWLING UNDER VEHICLE.
HWH SYSTEMS CONTROL
HOME
CAUTION!
LIGHT
STATUS
AUTOMATIC
HYD LEVEL
HYD LEVEL
STORING
MANUAL
R
STOP
CONTRAST
STP COVER
ROOM
STEP /
RESET
HOME
PAGE
HOME PAGE
AUTO STORE
BUTTON
Jack retraction is achieved from the "HOME" page. The
"AUTO STORE" button can be used with the ignition and
park brake on or off as long as the control panel screen is
on at the "HOME" page.
CAUTION:
THE OPERATOR MUST BE SURE THAT
THERE ARE NO OBJECTS UNDER THE VEHICLE AND
THAT ALL PEOPLE ARE CLEAR OF THE VEHICLE.
1. Turn a room panel key or ignition key on to turn the
CONTROL PANEL on. If preparing to travel, start the
engine.
2. Push the "AUTO STORE" button. The "AUTO STORE"
light will flash as "STORING".
3. As each jack retracts fully, it’s jack down indicator will
go out. (The panel does not show this). One minute after
all the jacks are fully retracted, the "STORING" light will
stop flashing and revert to a solid "AUTO STORE" light.
THE STORE/TRAVEL POSITION AND THE VEHICLE IS AT
STORE/TRAVEL POSITION
CHECK THAT ALL JACKS ARE FULLY RETRACTED INTO
WARNING LIGHTS. IT IS THE OPERATOR’S RESPONSIBILITY TO
CREATE A DRIVING HAZARD. DO NOT RELY SOLELY UPON
SEVERE DAMAGE TO THE JACKS AND OR THE VEHICLE AND
WITH THE LEVELING JACKS EXTENDED CAN CAUSE
WITH STRAIGHT-ACTING JACKS. MOVING THE VEHICLE
OR IN THE EXTEND POSITION. THIS VEHICLE IS EQUIPPED
LEVELING JACKS ARE STILL IN CONTACT WITH THE GROUND
DO NOT MOVE THE VEHICLE WHILE THE
THE PROPER RIDE HEIGHT FOR TRAVELING.
CAUTION:
JACK POSITIONS
EXTEND POSITION
4. Check that the jacks are retracted and the vehicle is
at the proper ride height for traveling before proceeding.
