ELECTRICAL CONNECTION DIAGRAM
200/210/225 SERIES LEVELING SYSTEM BI - AXIS VALVE
MP85.123C
13FEB04
* FUSE MAY BE REQUIRED - CHECK APPLICABLE CODE
PUMP RELAY CONNECTION DIAGRAM
TO ATTACH THE BRACKET TO THE FRAME.
IS BOLTED TO THE FRAME, USE THE GROUND STUD
THE PUMP TO THE BRACKET. IF THE PUMP BRACKET
FRAME, USE THE GROUND STUD TO ATTACH THE
GROUND CABLE THAT IS TO BE ATTACHED TO THE GROUND STUD.
PUMP MUST BE MOUNTED SOLIDLY TO FRAME. SOME PUMPS HAVE A
GROUND
BATTERY
-
+
* FUSE
NOTE: IF THE PUMP BRACKET IS WELDED TO THE
FUSE
10 AMP
GROUND STUD
NOTE: THE FOUR DIGIT WIRE NUMBER SUPERSEDES
ANY AND ALL WIRE COLORS.
CENTRAL GROUND
FOR LEVELING
SYSTEM - FUSED 10 AMP -
(WHITE) 6230
PUMP RELAY
CONTROL
PUMP RELAY
SUPPLY
SWITCHED GROUND
FROM THE VALVE
SWITCH - (BLACK) 8600
SW12 FROM
THE 210 LIGHT PANEL -
(BLUE) 6820
4
3
2
1
PUMP RELAY
THE PUMP CONTROL WIRES GO TO TERMINAL 2.
WIRING TO ROOM EXTENSION CONTROLS
ARE BY THE VEHICLE MANUFACTURER
THIS MUST BE A SWITCHED GROUND.
Summary of Contents for 225 Series
Page 30: ......
