Title
Rev.
Page
HMK-825 HMC-825
Ver1.5
P.14/65
2-8) Memory Switch
Please set the function of internal memory.
※
Please use the given program - ‘memory swtich setting utility program’.
※
The value is not deleted until the next value is changed, even though power off.
Memory SW
Value
SW1
p or m
SW2
0~1200 or 0~136
SW3 248-4000
SW4 Reservation
SW5 Reservation
SW6 Reservation
SW7 Reservation
SW8 Reservation
SW9 Reservation
1) SW1 :
* p(70
16
) : After command the cutting DC3 + “i”, it will be cut from the black mark starting
point to the value in the SW2 (plus) as the image below.
* m(6D
16
) : After command the cutting DC3 + “i”, it will be cut from the black mark starting
point to the value in the SW2 (minus) as the image below.
2) SW2 : The distance from the black mark starting point to the cutting position
* SW1 /p : You can set the value as 0~1200(0 ~ 150mm).
* SW1/ m : You can set the value as 0~136(0 ~ 17mm).
※
A value point indicates 0.125mm ex) In case of 100, 100 x 0.125 = 12.5mm
※
SW1,SW2 is used to set the cutting option (Black mark search as Full) at the Window
Driver (Window driver : DC3 +
“
i
”
)
Ex)
Page.2
Page 1.
ABC
On the back
Black mark
starting point
12
.5
mm
Cutting Position
Ex) SW1 = p, SW2 = 100,
Page 1.
ABC
Cutting Position
Black mark
starting point
Page.2
Ex) SW1 = m, SW2 = 100,
12
.5
mm
