3)SW3 : It is to set up the distance from the starting point of Ticket to the point of black mark.
It is to set up the initial position of the first page,if the dip switch is the mode ‘First page No cut’.
You can set up the range 0~120 or 120~4000.
0~120 should be 0~15mm, if the cutting position is the forepart of black mark.
12~4000 should be 15~500mm, if the cutting position is the rearpart of the black mark.
Notice :
The value ‘1’ means 0.125mm.
For example ) 300 x 0.125mm = 37.5mm
Notice :
The factory mode is 1048(131mm), and is the black mark for the right side.
Notice :
Please refer to 7.Ticket recommend.
Example)
Title Rev.
Page
HMK(P)-081,HMC-081 Ver1.0
19
ABCD
[Front page,printing side]
0~1
5mm or
15~500m
m
Starting point of black mark
Page 1.
Page 2.
Notice
:Black mark for
the lef side, and rear
side.