HW group
18
E-mail Settings
•
SMTP Server
–
IP address or domain address of the SMTP server.
•
SMTP Port
– Port number on which the e-mail server tunes in – 25 by standard.
•
Authentication
– Enable authentication; check if the SMTP server requires authentication.
•
Secure TLS mode
– Check if the SMTP server requires secure communication via SSL/TLS.
•
Username
– Username for SMTP server authentication. If the Authentication field is not checked,
the content of this field is irrelevant.
•
Password
– Password for SMTP server authentication. If the Authentication field is not checked,
the content of this field is irrelevant.
•
Importance
– Sets priority of the e-mail message. Important for filtering and further processing
of alarm messages.
•
FROM
– Sender’s e-mail address, i.e. of the device. The address may be required by the SMTP
servers and can be used to identify the device or to filter and further process alarm messages.
•
Subject of e-mail
– The field content can be used to identify the device, or for filtering and further
processing of alarm messages.
Email Test Log section
In this section, the SMTP server settings can be tested. Click Test Email to send a test e-mail to the
specified Email address. The Debug log window shows the communication with the SMTP server.
E-mail tab
STE2 – User Manual
Summary of Contents for STE 2
Page 1: ...User Manual...
Page 43: ......
