STE2
19
SMS tab
With the Wifi turned off, only the power-on option is shown:
Remote SMS gateway
•
Enable
–
Turns on the SMS sending function. For sending, the SMS alarm action must be set
at the sensor or input.
•
SMS Gateway Address
– IP address where “HWg-SMS-GW3” is located through which the device
will send SMS. It can be set including service - typically /service.xml
•
Port
–
The TCP port on which the gateway listens.
•
Username
–
User name for authorization in SMS GW.
•
Password
–
Password for authorization in SMS GW.
•
SMS + Ring When Alarm
–
Enables sending a SMS and then dialing the number.
SMS Test Log
In this section, the SMS gateway settings can be tested.
•
Test SMS
– Sends a test text message to the specified Phone number.
•
Test Call
– Dials the specified Phone number.
•
Debug log window
– Shows the communication with the SMS gateway.
WWW interface
Summary of Contents for STE 2
Page 1: ...User Manual...
Page 43: ......
