HW group
16
Sensor List section
*
•
State
– Input or sensor state.
•
Normal
– Idle state, all normal.
•
Alarm High
– Value has exceeded permitted upper limit.
•
Alarm Low
– Value has dropped below permitted lower limit.
•
ID
– Sensor ID identical to ID in Poseidon2 and STE2 units.
•
Type
– Sensor type; determine what type of sensor is in question (temperature / humidity / DI
input).
•
Name
– Sensor name for better identification in larger systems. The name can be set in the
Sensors or Digital Input tab.
•
Current Value
– Current value including unit of measure.
•
Safe Range
– Range of permitted values. If the current value exceeds the Safe Range, an Alarm
is activated.
•
Hysteresis
– Defines the insensitivity zone if the limit values are exceeded; prevents the activation
of multiple alarms if the temperature oscillates around the limit value.
•
Alarm Target
– Specifies the targets for alarm alerts (SMS + E-mail). Target recipients are defined
at the Alarms tab. The drop-down menu allows selecting an existing set of targets or creating
a new one.
•
Alarm Trigger Delay [s]
– Delays the alarm start alert by a specified time.
•
Code
– Full ID of the 1-Wire sensor.
•
Delete
– Button to delete the specific sensor.
* Sensors in Alarm state are highlighted.
Sensors tab
STE2 – User Manual
Summary of Contents for STE 2
Page 1: ...User Manual...
Page 43: ......
