PortStore5 Manual
HW group
www.HW-group.com
4
Technical specifications
RS-232 serial port
+ Data bits
7 or 8 or 9
+ Stop bits, parity
1 or 2, None / Odd / Even / Mark / Space parity
+ Baudrates
50 to 115.2 kBd – entire range
+ Data flow control
XON/XOFF, CTS/RTS, None
+ Interface
1x DB9M (RxD, TxD, CTS, RTS, DSR, DTR, RI, CD, GND)
+ Implemented RS-232 signals
RxD, TxD, CTS, RTS, DSR, DTR, RI, CD
RS-485 serial port
+ Termination
None (We recommend external 120-470Ω termination)
+ Isolation
RS-485 line not optocoupled to the device’s power supply
- electrically isolated RS-232/485 to Ethernet (1000 V)
Ethernet port
+ RS-232 Buffer memory
4096 kB Flash for incoming serial data
+ Buffer overflow signaling
Network
:
None
RS-232
:
HW or SW handshake if buffer is full
+ Buffer type
Linear FIFO data space
+ Buffer data readout format
RAW binary TCP/IP stream
Ethernet port
+ Interface
RJ45 100BASE-T / 100 Mbit/s
+ Compatibility
Ethernet: Version 2.0/IEEE 802.3
+ Supported protocols
IP: ARP, TCP + NVT (Network Virtual Terminal)
+ TCP connection closing
Data – 5s timeout (with NVT – ACK/NOP support)
Physical parameters & Environment
+ Temperature & humidity
Operating: -10 to 75°C (14 to 167 °F)
Storage:
-10 to 85°C (14 to 185°F), humidity 5 to 95 %
+ Power supply requirements
8-30V / Max. device current consumption 200 mA DC
- barrel (coaxial) power connector, GND on the shield
+ Dimensions / Weight
120 x 94 x 25 [mm] (H x W x D) / 260 g
Note:
This parameter table is only indicative.
For a valid table, see the specifications for the particular device model.
