IP Relay – 2x relay + RS-232 / Ethernet converter
HW group
June 2006
www.HW-group.com
Page 24 / 28
Table containg #A parameter values for particular IP Relay channel’s variations.
CH1 / CH2
Ordering numer YZ
*
#A
PO / NO
13
49
PO / NC
14 241
PF / NC
24 208
PF / NO
23 10
NC / PO
41 241
NC / PF
42 49
NO / PO
31 208
NO / PF
32 10
NO / NC
34 208
NO / NO
33 10
NC / NC
44 241
NC / NO
43 49
PO / PO
11 241
PO / PF
12 49
PF / PO
21 208
PF / PF
22 10
The
#A
value represents the decimal value of the controlling 8-bit IP relay port. It’s actually a
decimal formulation of the hexadecimal value of 5-byte controlling NVT command for controlling the
IP relay (see chapter “Selecting sequences for controlling Relay 1 and Relay 2”). You can get it also
by the means of the
Test Mode
of the
Hercules Setup Utility.
*
- Device version derived from the product signature (see chapter “Device versions”). It represents
the Y and Z letters or the product signature.
**
- Standard configuration
========= Other =========
D: Load/Save Settings from/to Flash
The “
D0
“ option loads saved configuration through „
D2
“. The “
D1
” option sets the IP Relay’s default
factory values.
R: Reboot
Software reset of the IP Relay. Necessary e.g. for changing the IP address etc.
