HWg-SMS-GW3 manual
HW group
www.HW-group.com
3
Technical parameters
ETHERNET
Interface
RJ45 (10BASE-T) – 10 Mbps or 10/100 Mbps network compatible
Supported protocols
IP: ARP, TCP/IP (http, NTP), UDP/IP (SNMP), netGSM
SNMP compatibility
Ver:1.00 compatible, some parts of the ver 2.0 implemented
GSM
Interface
Quad-Band 850/ 900/ 1800/ 1900 MHz,
Compliant to GSM phase 2/2+ – Class 4 (2 W @850/ 900 MHz) – Class 1 (1 W @ 1800/1900MHz)
Antenna connector
SMA male
POWER input
Port
POWER 9-30V DC
Type
Main device power input (typically 400 mA + external devices)
Connector
Jack (barrel, inner 2.5 mm outer 6.3 mm) & Terminal block (parallel connection)
LED Status indicators
POWER
Green - power OK
Modem
Blue – Activity on GPRS
Status
Yellow – blinking if device is OK
Alarm
Red – Error on device
LINK & Activity
Yellow - Ethernet connectivity
Physical parameters
Temperature range
Operating: -10 to 65 °C / Storage: -25 to 85 °C
MTBF
> 90 000 hours
Dimensions / Weight 92 x 76 x 28 [mm] / 300g
EMC
FCC Part 15, Class B, CE - EN 55022, EN 55024, EN 61000
Restarting into the default settings (LOAD TO DEFAULTS)
Restarting into the default settings via HWg Config
Right-click the MAC address of the device in HWg Config. Within the first 60 seconds after
powering up the device the factory settings can be restored through HWg Config.
Hardware restarting into the default settings
Disconnect the power supply, press the
Reset
button and at the same time reconnect the power
adapter and wait for 10 seconds. The default settings will be restored.
