HW Group HWg-PWR, Manual, Page: 22 / 32

HWg-PWR: M-Bus IP energy meter (SNMP, WEB) HW group
www.HW-group.com page 22
CC – E-mail address of the recipient of a copy of the alarm message. Only one e-
mail address can be entered.
The To and CC fields cannot accept distribution lists or multiple e-mail addresses. If
you need to send alarm messages to more recipients, ask your SMTP server
administrator to create a distribution list accessible through a single e-mail address.
Send Test Email section
After configuring Email Settings , use this button to send a test e-mail.
Time tab
The Time tab is used to configure system time and automatic synchronization with a
timeserver.
SNTP Setup section
SNTP Server – IP address or host name of the time synchronization server. Default
is time.nist.gov .
Time Zone – Timezone where HWg-PWR is located. Used to set correct system
time. Necessary for correct logging of measured values.
Summertime – Enables daylight savings time. Used to set correct system time.
Necessary for correct logging of measured values.
Interval – The period for synchronizing time with the server.
SNTP Synchronize section
The Sync button immediately synchronizes time with the time server. Can be used to test
the settings.
Time Setup section
The Time Setup section lets you enter current date and time manually, when
synchronization with a time server is unavailable.