HWg-PWR: M-Bus IP energy meter (SNMP, WEB)
HW group
www.HW-group.com
page 12
Automatic discovery of meters:
1.
At the
Device Base Parameters
page, fill in the
M-Bus Scan
section:
-
Address
– Range of M-Bus addresses where the meters can be discovered.
The default is 0-252; however, a smaller range can speed up the discovery
process significantly.
-
Serial Baudrate
– Communication speed. The default is 2400 but this can
differ for various meters – see the meter documentation.
-
Serial Parity
– Communication parity. The default is Even but this can
differ for various meters – see the meter documentation.
2.
Click
Scan
.
3.
The
M-Bus Device Scan Status
section displays the discovery progress (
Actual scan
state
) and discovered meters (
Found Device
).
4.
After the scan is complete,
Actual scan state
changes to
Stopped
.
Summary of Contents for HWg-PWR
