
HWg-PWR: M-Bus IP energy meter (SNMP, WEB)
HW group
www.HW-group.com
page 14
Adding discovered meters to HWg-PWR
1.
In the Device menu, select the desired meter. The
Edit xMeter
section displays.
2.
In the
Address M-Bus
field, fill in the address discovered by scan or written on the
meter or in the meter documentation. Set the
Serial Baudrate
and
Serial Parity
parameters – see the meter or its documentation.
3.
Turn on the meter in the system (change
Enable
to
Enable
).
4.
Click
Save
to save your changes.
5.
The
Secondary
Address
,
Medium
and
Manufacturer
fields are read out
automatically and displayed when the page is refreshed.
6.
Now select the
Scan Value
submenu of the corresponding meter (from the menu).
Summary of Contents for HWg-PWR
