12
Switchgear collector
Indicator:
When charging: The charging indicator is
red and green when fully charged.
Buzzer:
When it comes into contact with the
high-voltage live line, it will beep every 4
seconds, indicating that the line is live and
the collector is started.
Elastic band:
Attach the collector to the busbar and bundle
it with an elastic band.
Charging hole
:
Connect the charger while charging
。
3
、
Instrument self-test method
Connect the transmitter to the self-test test line as shown in the
figure below. The transmitter starts, the buzzer sounds, and the red and
green indicator lights flash alternately. The receiving host is turned on,
and the corresponding transmitter information is displayed in the
short-range nuclear phase mode, then the transmitter and the host are
working normally.
。
Reminder
：
1.when self checking, the distance between two transmitters and
receiving host should be more than 0.5m. When the distance is less than
0.2m, only one transmitter may be connected and the host computer
