- 12 -
sound, then the meter will enter the true state of boot.
2. Measurement Interface
It appears the measurement interface automatically when
the meter is on:
Figure 5 Volt-ampere phase measurement interface
If measurement methods choose three-phase three-wire,
lightly touch
icon with the touching pen and the icon
will become
, single-phase measurement can be
realized with the same operation.
This meter has data hold and storage function, lightly
touch
icon, icon color turns from gray into red
as
. Data measurement stops and then appears save
icon, lightly touch save icon and store the data. Circulation
storage is used; new stored data will deleted the first saved
data automatically.
Checking function can help to check the stored data, with
purple icon R * * (* * represents 01 and 02... 10), use the
