90
edging surface.
•
Shape of step bevel can be selected according to the type of the frame and the lens to be
processed.
Rear step bevel
Front step bevel
T-bevel (Both)
•
In case of ‘Front step bevel’ and ‘T-Bevel (Both)’, you can adjust bevel position in the manual
position modification screen displayed during the edging process.
5.8.9.
Safety beveling & Polishing option
•
Safety beveling & polishing may not be available because of the step bevel settings so these
options are must be set in the step bevel editor instead of the main screen.
Front Safety Beveling
Rear Safety Beveling
Polishing
Partial Step Bevel
O
O
O
Full
Step Bevel
Flat
O
X
O
Bevel
O
X
X
•
Safety beveling & polishing will be applied on the edging area which processed by main wheel.
!
NOTE
1
2
3
①
Front safety beveling
②
Rear safety beveling
③
Polishing
