65
HBK-410
•
Demo lens for switching camera mode and detection of hole/slot must have an axis indicator.
There are 2 ways to indicate the axis.
①
To draw a straight line along the axis.
②
To mark
the 3 dots along the axis. If there is no axis indicator, the horizontal line on the camera image
is regarded as the axis of demo lens. Red lines on the below figures respectively represent the
axis recognized.
•
When you press the Hole / Slot Easy Moving button, following screen will pop up. You can use
this to move the hole / slot.
①
Select moving type: You can select moving type. When the selected one is a hole, it
supports just one moving type. When the selected one is a slot, it supports 6 types of
moving.
②
Move hole / slot: It provides moving buttons according to the selected moving type. How to
move the selected hole / slot according to the moving type is explained below.
•
The slot icon on the buttons of moving type represents the start(
) and end(
) position
like below figure.
!
NOTE
1
2
