27
12-2. Detailed Assembly Procedures
12-2-1. Installing the Microscope Body (Fig.9)
1)
Loosen the body clamping knob
①
and insert the microscope body
②
gently into the mounting hole of
the standard stand.
2)
Position the microscope body so that it faces frontward and tighten the body clamping knob
①
.
Fig. 9
12-2-2. Mounting the Observation tube (Fig.10)
1)
Using the Allen screwdriver fully loosen the observation tube clamping screw ①.
2)
Aligning the positioning groove ② of the observation tube with the positioning pin ③ of the
microscope body, tit the dovetail ④ at the bottom of the observation tube into the dovetail
mount ⑤ of the microscope body.
3)
Tighten the observation tube clamping screw ① firmly using the Allen screwdriver.
Fig. 10
If it is required to position the zoom adjustment knob③ near the focus adjustment knob
④, position the microscope body in the opposite orientation.
➊
➋
➍
➌
➊
➎
➋
➌
➍
Summary of Contents for HSZ-700
Page 1: ...1 HSZ 700 STEREO MICROSCOPE...
Page 24: ...24 HSZ 700 STEREO MICROSCOPE 11 Specifications...
Page 25: ...25...
