Huvitz HSZ-700, Manual

Page: 15 / 29

15
9. Operation
9-1. Stand
9-1-1. Using the Stage

When reflected light illumination is used, the stage plate can be placed either the white or black surface
facing up depending on the specimen.

When transmitted light illumination is used, use the transparent glass stage plate.
9-1-2. Adjusting the Focus Adjustment Knob Tension (Fig.1)

Hold the left and right focus adjustment knobs
①
with both hands, fix the left knob and rotate the right
Knob. The rotation tension of the knob is increases or decreases according to the direction in which the
right knob is rotated.

If the rotation tension is increased too much, accurate focusing is not possible and the mechanism may
be damaged.
Fig. 1
9-1-3. Adjusting the light illumination

Turn the light knob of transmitted light or reflected light to clockwise direction, the light illumination is
increased(HSZ-ILST7, HSZ-ILSTS7)
This operation is intended to facilitate the rotation of the knobs while preventing
spontaneous drop of the microscope body. It is recommended to set the knob tension
to a slightly higher level than the point where spontaneous drop occurs.
To decrease
To increase
➊
Clamp