Huvitz HLM-7000P, Service Manual

Page: 28 / 59

Auto Lensmeter HLM-7000P
27
No Component Removal method
1 BACK BONE
-
Disconnect ‘PD Bar Board’ cable from ‘Main Board’.
- Remove cap [18]
- Reference : 3.3.1 PD-Bar Sub-Assembly
-
Please see the drawing for disassemble, as needed
- Be careful to prevent from interfering with the [17]
which is included in the optical components
when assembling or disassembling the PD assembly.
- Assembly is the reverse procedure of disassembly.
2 B6_LED-BONE-ASSY
3 SHAFT FIX BRACKET
4 GUIDE SHAFT 4
5 B4_FOOT-EXTENSION-SPRING
6 FOOT MOVING BLOCK DAMPER
7 FOOT MOVING BLOCK ASSY
8 B4_FOOT-FRAME-ASSY
9 FIXING BRK ASSY
10 B4_PEN-SLIDE-ASSY
11 B2UP_PEN-FRAME-ASSY
12 PCB ASSY(CMOS B/D-V100)
13 B4_CCD-CAMERA-COVER
14 COVER TOP 3
15 B2UP_PD-BAR-ASSY
16 PD PINION ASSY
17 B4_FILTER-HOUSING-ASSY
18
FILTER-HOUSING-CAP-13
사출
19 HARNESS(MB(CN10) TO CMOS)