36
3.1.7 TIME SCHEDULE
(
: MAIN MENU / MOTION CONTROL / TIME SCHEDULE)
Schedule enables you to schedule a sequencing by day and time. Up to 8 timeline
can be selected for a day.
Select number of schedule. Up to 8 timeline can be selected for a day.
Default value is 1.
Determine whether to use this function or not.
Set start time. Press the IRIS OPEN or MENU key to select hour and
then press again the IRIS OPEN or MENU key to select minute. After that you
should press the 'IRIS CLOSE' key to escape this menu.
Set end time.
Select the sequencing action to schedule the action.
No action.
The camera move as PTRN1~PTRN4.
The camera move as SEQ1~SEQ8.
Scan clockwise automatically.
Scan counterclockwise automatically.
The camera working Auto Scan mode by custom mode.
Set : Save the value and then move out this menu.
3.1.7.1 TIME SCHEDULE SETTING
1) Number :
2) Enable :
3) Start Time :
4) End Time :
5) Time Act :
ㆍOFF :
ㆍPTRN 1~4 :
ㆍSEQ 1~8 :
ㆍCW :
ㆍCCW :
ㆍCustom :
6) Set :
Path
Chapter 3. Menu configuration and operating
TIME SCHEDULE
-------------------------
Number:
1
Enable:
Off
Start Time:
00:00
End Time:
00:00
Time Act:
SEQ1
Set
Back
Exit
