33
3.1.4 SEQ SCAN
(Path : MAIN MENU / MOTION CONTROL / SEQ SCAN)
This function is to move the camera to the memorized positions one by one.
The camera moves to the memorized positions one by one according
to the group. Please refer to [3.1.1 PRESET] to set group. Max. 8 groups are
available.
Run SEQ SCAN by user set group.
3.1.4.1 SEQ SCAN SETTING
1) Seq Group :
2) Run Seq Scan :
<Notice>
Move the joystick to stop the seq scan, after few seconds the seq scan again.
Send the command of Sequential Scan Stop or menu key to move out the Sequential scan.
Chapter 3. Menu configuration and operating
SEQ SCAN
----------------------------------
Seq Group:
1
Run Seq Scan
Back
Exit
