HUUM HIVE WOOD 13kW, Installation And User Instructions Manual

Page: 8 / 24

8
material, fire-resistant floor protection must be installed in front of
the furnace door. The protection must be 23.63 in/600 mm wider
than door width
C , with a depth of at least 15.75 in/400 mm.
Connecting the sauna stove with the chimney
• The flue gas outlet of HUUM sauna stoves is at the top of the
sauna stove. The sauna stove is connected to the chimney using
special metal flue pipes, which are optionally sealed with heat-
resistant sealing rope.
• The elbows of the connection tubes must be smooth to keep
draught loss to a minimum.
• The tube is inserted through the wall of the chimney and sealed
with mineral wool.
• The sauna stove can only be connected to the chimney by
specialists.
• The flue gases of the stove must be directed into a separate flue.
Use of a common flue with other furnaces is not permitted.
Important! Forced extract ventilation may cause problems with the
ventilation of the room and inadequate furnace combustion, therefore,
designing and building such a ventilation system is permitted only with
the supervision of a licensed specialist.
APPLICATION INSTRUCTION
Preparation for use
• Any natural granite stones or special sauna stove stones sold at
hardware stores are suitable for the sauna stove. Use of ceramic
stones may shorten the life of the stove.
• Sauna stove stone quantities:
• Hive Wood 13: 6 x 33 lb / 6 x 15kg;
• Hive Wood 17: 5 x 44 lb + 2 x 33 lb / 5 x 20kg + 2 x 15kg.
Important! The sauna stove can only be heated with wood logs.