HUUM HIVE HEAT 12, Installation And User Instructions Manual

Page: 7 / 26

7
deform, and the manufacturer is not responsible for this defect.
• In the case of overheating, the ash tray must be completely closed
to stop the furnace combustion process. Keep the furnace door
closed. If possible, cut off air flow to the room.
• It is recommended each time you heat the sauna stove that some
quantity of the fuel consists of small and easily flammable pieces of
material which are more porous and lighter compared to the rest of
the fuel quantity.
• The sauna stove can only be heated with wood logs. For Hive Heat
12, 30 cm logs are best suited.
• If necessary, the supply of combustion air can be adjusted by
controlling the draught of the air vents in the front side of the
heater by changing the position of the shutter. It is recommended
to keep the ash tray open by up to 2 mm for ignition. During
heating, it is recommended to keep the air vents fully open at the
top of the front side of the heater.
• Keep the furnace door closed during heating. Open the door only to
add firewood.
• Avoid splashing water onto the hot glass of sauna stoves with a
glass door. Tempered door glass is not under warranty.
• The heating time of the steam room is dependent on the thermal
resistance of the wall materials, room size and power of the sauna
stove.
• The outer surfaces of the sauna stove are hot during heating.
Contact with exposed body parts can cause burns.
• Do not splash salt water onto the sauna stove.
• It is not advisable to throw hard water or water with a high iron
content onto the sauna stove.
NB! Do not exceed the humidity indicated on the chart when
steaming.