REV C
4-10
117592
to half throttle and stroke the steering control lever
forward and reverse several times until the wheel motor
operates smoothly through the entire speed range.
13.
IMPORTANT:
With the engine off, disconnect the two
female spade connectors from each other (from step #3)
and reconnect them to the seat switch. This must be
completed so that the safety circuit is functioning
properly. Figure 4-26 & Figure 4-27
14.
Check to make sure all tools or obstructions are removed
Figure 4-25
Prefill
pump
here
Right side pump
Prefill
pump
here
Left side pump
WARNING
Do not operate the mower without plugging the mower’s
wiring harness into the seat switch. This switch is an
important part of the safety start interlock system. Serious
injury can result if the seat switch is not plugged into the
mower’s wiring harness.
WARNING
Never operate the mower with a non-functioning seat
switch. Always reconnect the seat switch to the mower
harness.
Figure 4-26
Figure 4-27
Mower
harness
Seat
switch
Female
spades
Mower
harness
Female
spades
Summary of Contents for Super Z HD
