Hussmann® Impact™ Hot Food Merchandiser
Installation
22
Wiring
Electrocution, equipment failure or property damage could result if an unlicensed
electrician performs the electrical installation. Ensure that a licensed electrician
performs the electrical installation.
A wiring diagram for the specific model is shipped with the merchandiser. The wiring diagram provides
electrical specifications, an electrical schematic and a parts list. Refer to this wiring diagram and the
merchandiser serial number plate for electrical information.
Field wiring must be sized for the components amperes printed on the serial number plate. Actual ampere
draw may be less than specified.
All electrical connections should be in compliance with the NEC and all applicable local codes by a
licensed electrician. Refer to the wiring diagram furnished with your merchandiser for the electrical
specifications.
Follow the steps below to connect the power supply to the merchandiser. Refer to the figure below.
1. Remove the electrical raceway cover.
2. Two ¾” x 1” knockouts are provided for routing of power supply wiring. Route power supply wiring
through the knockout holes.
3. A power supply terminal block (TB0083) is located on the electrical raceway. Connect the wiring
to power supply terminal block (TB0083) according to the schematic provided.
4. Reattach the electrical raceway cover.
