SGN141S-1 R290 Self-Contained Low Height Open Refrigerated Display Cabinet
Manual
Ju
ly
2021 Final Rev: 30A01
14
•
Spray fluid onto a cloth then wipe the glass in a circular motion.
Painted Surfaces
•
Use a soft cloth.
•
Do not use solvent based cleaning products.
•
Always rinse internal surfaces with warm water and allow to dry before re-starting the
refrigeration system.
Evaporator Coil
•
Never use sharp objects around evaporator coils to de-ice them.
•
If the coil has solid ice formed. This indicates the refrigeration and/or defrost cycle are not
set correctly. Contact your refrigeration service provider to investigate.
•
Use warm water to de-ice coil if required, but not so much as to flood the well/condensate
tray in the lower section of the cabinet.
•
Use a soft brush or vacuum brush to clean coil. Use PPE (gloves, safety glasses, etc.)
•
Do not bend fins.
Condenser Coil
•
Never use sharp objects around condenser coil.
•
Clean the condenser coil with a soft brush or a vacuum cleaner. The dust and fluff obstruct
good air circulation and reduces cabinet performance and increases energy consumption. To
reach the condenser coil, remove the protection grille, clean it very carefully (avoid touching
other components) and put the grill back in its place.
•
Use PPE (gloves, safety glasses, etc.).
•
Do not bend fins.
WARNING: - Always isolate cabinet from the mains power supply before deep
cleaning.
WARNING: - Keep water away from electrical components.
