6-6
SERVICE
5. Remove the heater from the face of the
coil. Be sure to save the attachment clips
for the new heater.
6. Install new heater.
7. Reposition fan plenum.
8. Turn on power.
9. Verify that heater is working properly.
REPLACING ELECTRIC DEFROST
HEATER
These full-length heaters are attached to the
front of the coils. They may be accessed by
removing the fan plenums. To replace:
1. Turn off power.
2. Remove wire display racks and bottom
display pans from the entire case.
3. Cut the heater from the heater wiring
harness.
P/N 0416183C
Heater
Coil
Bracket
Coil Fin
Heater
Clip
Coil Tube
Clips to be located 5-6 inches from bracket
Always disconnect the electrical power
at the main disconnect when servicing
or replacing any electrical component.
This includes, but is not limited to,
such items as fans, heaters, thermo-
stats and lights.
WARNING
!
Modular Defrost Heater
Wiring Harness
Sealant
