8 of 8
HUSSMANN CORPORATION, Bridgeton, MO 63044-2483 U.S.A.
C3LGE
Data Sheet
REPLACING CANOPY AND SHELF LAMP BALLAST
Ballast
Light Tray
Hinge
Remove Screws
Light Tray
Light Tray
The ballast for the canopy and
shelf lamps are located above
the light tray on the right-hand
end (when facing case) of the
merchandiser.
To access the ballast:
1. Remove screws from the
front-lip of light tray flange
covering the bottom edge of
the canopy. Also remove
screws located near the
middle-rear of light tray.
3. Swing front of light channel
down on it’s rear hinge.
4. Service or replace ballasts as
required.
5. Reassemble items as they
were originally installed.
Make sure that wires are not
pinched by re-installed light
tray.
NOTE
: Rail lamp ballast is
located behind the lower front
panel.