For access to ambient fans:
1. Turn off power.
2. Remove lower front panel.
3. Disconnect fan from wiring harness.
4. Remove screws holding motor and grille.
5. Replace fan motor and grille.
6. Reconnect fan to wiring harness. Turn power
on.
7. Verify that motor is working and blade is
turning in the correct direction.
8. Replace lower front panel.
REMOVING OPTIONAL RAIL LAMP
POLYCARBONATE COVER
The rail covers are removed without tools. From
the front of the case, grasp the cover with both
hands. Apply pressure as shown in the photo. Pull
forward and up until the back of the cover clears
the retainer.
ELECTRICAL SERVICE RECEPTACLES
The receptacles located on the exterior back of the
merchandisers are intended for scales and other
light duty appliances that are found in meat and
delicatessen departments. The receptacles are not
intended for large motors.
6-2
S
ERVICE
P/N 406928
Screws
