Page 8
OPERATION and NORMAL MAINTENANCE
TEMPERATURE CONTROL –
The temperature control which senses the cold wall temperature is located at
the side of the case. Adjustment of the control is done by turning the knob clockwise
for colder temperatures and counterclockwise for warmer temperatures.
The control is adjustable for both Freezer and Refrigerator Temperatures.
Towards the Maximum Zone are freezing temperatures and towards the Minimum
Zone are refrigerator temperatures. Due to the case design, once an adjustment is
made some time will lapse before the temperature inside the fixture reacts to the
change.
DEFROSTING – Disconnect Power Supply Before Starting -
Defrosting is accomplished manually by scraping frost from areas where it
has collected on the cabinet interior. Remove excess ice and water. After washing
and drying thoroughly reconnect the power supply.
CONDENSING UNIT –
On Models so equipped, check occasionally to assure that the condenser fan
motor in the compressor area is operating properly. This motor assists in the cooling
process and also keep the compressor cool for longer life.
