Hussmann ARV-1230, Owner'S Manual

Page: 8 / 24

DOOR TORQUE ADJUSTMENT
Check the torque by opening the door 45° then
releasing it. The door must close and seal com-
pletely. If it does not seal, adjust as follows:
1. Place one wrench each on the two lower
support nuts.
2. Loosen the lower nut while holding the
upper nut in place.
3. Once the lower nut is loose, the upper nut
can be rotated away from the hinge to increase
torque or toward the hinge to decrease torque.
4. Once torque is adjusted, hold the upper nut
in place while tightening the lower nut.
AUXILIARY RECEPTACLE
There is an auxiliary 110V plug receptacle
(female) on the back of the unit near the top to
allow retailers to use an auxiliary lighted sign.
This plug is limited to 1A for ARV-1230 and
3A for ARV-570, and should not be used for
anything other than a lighted sign requiring the
stated Amperage or less. The plug is protected
by a separate fuse. The fuse can be replaced
with a like fuse available at hardware stores or
automotive parts retailers, as well as through
Hussmann Service. For access to the fuse
holder, carefully push the cover to the right to
clear the flange, then pull and rotate out.
6
Safe-NET software Version 9.03 or later
1 October 2009 — P/N 0512887_A
ARV-570 & ARV-1230
©2009 HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
U.S. & CANADA 1-800-922-1919 • MEXICO 1-800-522-1900 • WWW.HUSSMANN.COM
ARV-1230
Use 1A fuse only. Use of higher rated fuse
invalidates the warranty and may lead to fire.
ARV-570
Use 3A fuse only. Use of higher rated fuse
invalidates the warranty and may lead to fire.
WARNING
!
Auxiliary Outlet
Fuse Box and Cover
View from Back of Chamber
Fuse
Outlet
Spacer