Standard Operating Procedure
HUSQVARNA TILE SAW 9” TS73R
Version 3 Issue date: 6/05/2017
Page 3 of 4
20 Goodshed Road Upper Hutt
Phone 04 528 4473
5.2 Precautions for site
Do you have a
FIRST AID KIT?
Do you have a
FIRE EXTINGUISHER?
Can you make an
EMERGENCY CALL?
Section 6: Personal Protective Equipment (PPE)
Appropriate Personal Protective Equipment (PPE) is required for the operator and persons
assisting with loading and unloading.
Wear High Visability clothing if you are working with other people on the work site.
Tight fitting gloves recommended.
Section 7: Power Source and Lubricants
Power source
240V Electricity. Always use a residual-current circuit breaker (RCCB),
Ground Fault Circuit Interrupter, Transformer or other suitable electrical
Safety device.
Section 8: Operating instructions
1.
To start the machine press the green button on the switch.
2.
To stop the machine, press the red button.
Square Cuts:
Place the dish support head to the rear of the slide.
Position the tile on the table with the edge firmly against the plate stop
Pull the head steadily towards you without forcing the blade or making sudden contact
with the tile.
45° Degree bevel cuts:
Loosen the two adjusting nuts on the
support head
Tip over the cutting head and rail assembly
Retighten the adjusting nuts and follow the
instructions as above.
