WARNING!
Before starting up machine make sure you
completely read these instructions. Be familiar
with operation of the machine before operation!
WARNING!
Always make sure the saw is connected to a properly
grounded electrical outlet. Failure to comply with this
warning could result in serious bodily injury or death!
SAFETY INSTRUCTIONS
WARNING!
Use ONLY Reinforced Abrasive Blades or Diamond
Blades with this machine.
Use ONLY blades marked with a maximum operating
speed greater than the blade shaft speed.
DO NOT use carbide tipped, wood cutting, or circular
saw blades with this machine.
Before performing any maintenance, ALWAYS locate
the machine on a level surface with the engine / motor
OFF and the start switch in the OFF position, and the
power source disconnected.
The working area must be completely
clear, well lit and all safety hazards
removed.
Any persons not involved in the work,
should leave the area.
The operator must
wear protective clothing
appropriate to the work
he is doing.
Any persons not involved in the work should
leave the area.
These signs will give
advice for your safety
Follow our instructions strictly and your machine
will give you long service in normal operating
conditions.
MANDATORY
INDICATION
I N F O R M AT I O N
INSTRUCTION
WARNING
PROHIBITION
Before leaving our factory every machine
is thoroughly inspected.
8
