21
MAINTENANCE
Motor Brush change-out
•
Remove the Motor Brush. Clean the Brush Housing
of all carbon dust and fragments.
•
Align a new Motor Brush with the Brush Housing. Insert
the new Motor Brush.
•
Replace the Motor Brush Cap (E8). Using the slotted
screwdriver, rotate clockwise to secure in place.
• Using this same method, install a new Motor Brush
on the other side of the Motor.
WARNING!
Disconnect the tool before servicing and when changing
accessories. Care must be taken to ensure the spring
end is straight before installing the Motor Brush Cap.
•
Insert a slotted screwdriver into the Motor Brush
Cap (E8). Rotate counter-clockwise and remove the
Cap. Repeat on the other side of the Motor.
E8
