Husqvarna TS 350E, Operator'S Manual

Page: 6 / 16

Operator’s manual - TS 350 E
• Use of a diamond disc for water lubricated cutting of
marble, stone, granite, brick and facings (porcelain,
glazed tiles, ceramics, etc). The use of any other disc is
forbidden (abrasive, saw, etc).
• Competent personnel (quali fi cations, age, training, ed-
ucation) who have studied the manual in detail before
starting work: any fault of an electrical or other nature
must be checked by a competent person (electrician,
maintenance foreman, authorized dealer, etc).
• That the warnings and instructions marked on the
machine are followed (adequate personal protection,
correct use, general safety instructions, etc).
• That no modi fi cation, transformation or addition is
detrimental to safety and that it is carried out without
prior authorization from the manufacturer.
• Respect of the maintenance intervals and periodical
checks recommended.
• That only genuine spare parts are used for repairs.
Use
Sawing marble, stone, granite, brick, cement and all fac-
ings (porcelain, glazed tiles, ceramics, etc).
Tools
Water lubricated diamond disc diameter
300 mm - diameter 350xmm (D)- bore 25.4
mm (AL). (Information from your usual sup-
plier).
1. Carborundum disc 2. Saw blade
Any application not corresponding with the intended use
(use of a saw blade, abrasive disc, etc) is prohibited.
Inspection-Description of the
machine
• On receiving the machine check its condition.
• Always keep it perfectly clean.
• Check the supply cable lead periodically.
• Always keep alert when working.
• Check the mounting of the components (abnormal
vibration).
See fi g. 1
1. Chassis-tank
2. Leg
3. Head clamping handle
4. Water pump
5. Lifting lever
T
AL
D
1
2
6. Locking handle
7. Loading leg
8. Drain plug
9. Motor
10. Lack of voltage switch
11. Hood
12. Disc casing
13. Housing cover
14. Movable table
15. Table stop
16. Movable table stop
17. Manufacturer’s plate
18. Cutting guide
19. Table locking
20. Carrying handles
21. Transport wheels
22. Water tank
23. Water level
Handling - transport
Dismantle your machine into two parts.
Table part (See fi g. 3)
• Remove the table by tilting it slightly so as to clear the
rear retainer pins
Blocking table for transportation(See fi g. 4)
Folding the feet (See fi g. 5)
Transport (See fi g. 6)
Loading (See fi g. 7)
Placing on feet (See fi g. 8)
Inspection before starting
Please read the instructions for use prior to
operating the machine for the
fi rst time.
The use of ear protection is mandatory.
The operator must wear protective
clothing appropriate to the work he
is doing. We recommend that this
includes both eye and ear protection.
The working area must be completely cleared,
well lit and all safety hazards removed (no water
or dangerous objects in the vicinity).
6
- Polish