Husqvarna TC 250 2012, Specifications - Operation - Maintenance, Page: 81 / 228

SPECIFICATIONS - OPERATION - MAINTENANCE EN - 39
EN
CLEANING
IMPORTANT RECOMMENDATION
Premised that, before the motorcycle washing, it is necessary to
protect opportunely from the water the following parts:
a) Rear opening of the muffler;
b) Clutch and brake levers, hand grips, handlebar commuta-
tors;
c) Air cleaner intake;
d) Fork head, wheel bearings;
e) Rear suspension links.
In addition to these precautions, NEVER AL -
LOW HIGH-PRESSURE AIR OR WATER to get in
contact with any ELECTRICAL PARTS, the FUEL
INJECTION SYSTEM, and especially the elec -
tronic control unit and the throttle body.
After washing
- Remove the plastic bags, and clean the air cleaner intake.
- Lubricate the points listed in the Maintenance Table (Appendix A).
- Briefly warm-up the engine
- Test the brakes before riding the motorcycle.
WARNING*: Never wax or lubricate the brake
disc. Loss of braking and an accident could
result. Clean the disc with an oilless solvent
such ans acetone. Observe the solvent warn -
ings.