Husqvarna TC 125, Owner'S Manual, Page: 122 / 163

16 TUNING THE ENGINE
120
16.1 Checking the play in the throttle cable
400192-11
–
Check the throttle grip for smooth operation.
–
Move the handlebar to the straight-ahead position. Move the
throttle grip back and forth slightly to determine the play in
throttle cable
A .
Play in throttle cable 2 … 3 mm (0.08 … 0.12 in)
» If the throttle cable play does not meet specifications:
–
Adjust the play in the throttle cable. ( p. 120)
Danger
Danger of poisoning Exhaust gases are toxic and
inhaling them may result in unconsciousness and
death.
–
Always make sure there is sufficient ventilation
when running the engine.
–
Use an effective exhaust extraction system when
starting or running the engine in an enclosed
space.
–
Start the engine and let it run idle. Move the handlebar to and
fro over the entire steering range.
The idle speed must not change.
» If the idle speed changes:
–
Adjust the play in the throttle cable. ( p. 120)
16.2 Adjusting the play in the throttle cable
Preparatory work
(TC 250)
–
Turn the tap handle of the fuel tap to the
OFF
position.
(TX 300)
–
Turn the tap handle of the fuel tap to the OFF position.
–
Remove the air filter box cover. ( p. 68)
–
Remove the seat. ( p. 66)
–
Remove the right side cover. ( p. 73)
–
Remove the fuel tank. ( p. 75)
–
Check the throttle cable routing. ( p. 82)
K00895-10
Main work
–
Move the handlebar to the straight-ahead position.
–
Push back sleeve
1
.
–
Ensure that the throttle cable sleeve is pushed all the way
into barrel adjuster
2 .
–
Loosen nut
3
.