Husqvarna TC 125, Owner'S Manual, Page: 70 / 163

11 SERVICE WORK ON THE CHASSIS
68
F00108-10
(TX 300)
–
Mount the front of the seat on the collar bushing of the
fuel tank and the rear in the bracket.
–
Push the seat forward.
–
Make sure that the seat is correctly locked in.
–
Mount and tighten screw
1
.
Guideline
Remaining screws,
chassis M6 10 Nm (7.4 lbf ft)
Finishing work
–
Install the air filter box cover. ( p. 69)
11.22 Removing the air filter box cover
K00901-10
(TC 250)
–
Pull off the air filter box cover sideways in areas
A
,
B
and
C
, and remove toward the front.
K00908-10
(TX 300)
–
Pull off the air filter box cover sideways in areas
A
,
B
and
C
, and remove toward the front.