Husqvarna SG13, Operator'S Manual

Page: 17 / 48

17
2
1
FORWARD
5. Insert “L” end of throttle cable into the outside
hole of the engine throttle control lever.
6. Attach the throttle cable to the engine using the
double wire clamp removed in Step 1.
7. Test throttle control by pulling back throttle handle
on console. Throttle arm on engine should be
pushed completely forward. Cable should not slip
in clamp when doing this test.
8. Test proper wire length by pulling on the handle
adjustment lever and raising and lowering the
handle to maximum position without any pull on
harness.
9. Reattach air cleaner to engine.
10. Remove unit from pallet.
8060-044
1. Engine throttle control lever
2. Throttle cable